Key takeaway
“No hot water” is a symptom, not a diagnosis. Tell the trade whether heating still works, whether every hot tap is affected, what type of system you have and whether a boiler or cylinder appears to be involved. Do not remove appliance covers or attempt gas work to gather more information.
TradeKind helps homeowners find local Sussex trades
Browse approved local trade profiles, compare nearby Sussex trades or post a job for free.
If your boiler or heating system appears to be responsible for the loss of hot water, start with a boiler or heating engineer who offers that work. If the property uses a gas appliance, gas work must be carried out by someone appropriately Gas Safe registered and competent for that work. A plumber is more suitable when the problem is clearly ordinary water pipework, taps or plumbing components rather than the gas appliance itself.
The key is to describe what stopped working.
Four facts quickly narrow the enquiry
Before calling anyone, answer these without opening or dismantling equipment:
1. Do you have heating?
If radiators still heat normally but there is no hot water, say so.
2. Is every hot tap affected?
If one tap is faulty but others are hot, that is different from the whole property losing hot water.
3. What produces your hot water?
If you know whether you have a combi boiler, another boiler-and-cylinder arrangement, an electric cylinder or another system, mention it. If you do not know, say that rather than guessing.
4. Did anything change recently?
Recent boiler service, plumbing work, bathroom renovation, a power interruption or other work can be useful timeline information without proving the cause.
When a boiler engineer is the strongest first route
A boiler engineer is a logical first contact when the hot-water problem appears to involve the boiler itself.
Examples include:
- the boiler is not operating normally;
- the display or normal controls show an issue;
- heating and hot water are both affected;
- the problem began around boiler work;
- the hot water repeatedly fails even though taps and ordinary pipework appear normal;
- the boiler needs assessment rather than simple external plumbing repair.
If it is a gas boiler, the important qualification is not the words “boiler engineer” on their van or website. HSE guidance states that anyone employed to work on gas appliances in domestic premises must be Gas Safe registered and competent in that area of gas work.
Where a heating engineer fits
A heating engineer can be the better route when the problem appears connected to the wider heating and hot-water system.
That can be relevant where:
- radiators and hot water are both behaving abnormally;
- a cylinder or heating controls are part of the problem;
- the system has several connected components;
- recent heating alterations preceded the fault;
- the homeowner is unsure whether the heat source, controls or hot-water side is responsible.
Some heating engineers are also gas engineers and boiler specialists; others focus on different systems. Check the actual services and qualifications shown by the business.
When a plumber may be enough
A plumber may be suitable where the issue is clearly on the ordinary water side of the system.
For example:
- one hot tap is faulty while others work;
- a tap or mixer itself needs repair;
- accessible pipework is leaking;
- a plumbing valve or fitting needs attention and the plumber offers that work;
- the problem is downstream of a working hot-water source.
A plumbing profile on its own should not be treated as evidence that someone can work on gas appliances.
Do not turn the enquiry into DIY fault finding
The engineer does not need you to remove covers, test internal components or alter gas equipment.
Useful observations are enough:
- “heating works, no hot water from any tap”;
- “both heating and hot water stopped this morning”;
- “kitchen hot tap works, shower does not”;
- “hot water is intermittent”;
- “problem started after bathroom work”;
- “boiler is on but I do not know what the display means”.
That is safer and more useful than an uncertain diagnosis copied from a forum.
If you suspect the gas appliance is unsafe
Do not use an appliance you suspect is unsafe until it has been checked by a Gas Safe registered engineer. If there is a suspected gas leak, follow the current gas-emergency guidance rather than waiting for an ordinary trade appointment.
This article is about routing a no-hot-water fault, not diagnosing gas safety problems remotely.
A good Sussex enquiry is short and specific
For example:
“Horsham: no hot water from any tap since this morning. Central heating is still working. Gas boiler in kitchen, no recent plumbing work. Looking for someone who can diagnose the hot-water fault.”
Or:
“Eastbourne: heating and hot water have both stopped. Boiler appears powered but I have not opened or reset anything internally. Need a suitably qualified engineer.”
Both give the business a useful starting point.
Browse boiler engineers, browse heating engineers, browse gas engineers or post the job.
Frequently asked questions
Who should I call when I have no hot water?
If a boiler or heating system appears to be involved, start with a boiler or heating engineer who offers that work. If the issue is clearly with taps or ordinary water pipework, a plumber may be suitable.
Does a boiler engineer have to be Gas Safe registered?
If the work involves a gas appliance, the person carrying out the gas work must be Gas Safe registered and competent for that area of gas work. Check the engineer rather than relying on the business title alone.
What should I tell the engineer before they visit?
Say whether heating works, whether all hot taps are affected, what heat source you have if known, whether there is a hot-water cylinder and whether the problem started suddenly or after recent work.
Explore trades across Sussex
These are some of the main trades and Sussex areas you can browse on TradeKind. You can also explore many more trades, towns and villages across East Sussex and West Sussex, including Brighton & Hove.
Browse by trade
Can’t see what you need? Browse the full Sussex Trades Directory to explore more trades and areas.
Browse all trades and areasKeep reading
Boiler Losing Pressure: Who Should You Call in Sussex?
For a gas boiler that keeps losing pressure, the right first call is a Gas Safe registered engineer who is competent to work on boilers. This Sussex guide explains what to record before the visit and why a general plumber is not automatically qualified for gas-boiler work.
Radiator Not Heating Properly: Plumber or Heating Engineer?
A heating engineer is usually the best first call when one or more radiators are not heating properly, while a plumber may be suitable when the problem is clearly with a leaking radiator, valve or nearby pipework and heating work is within their service. This Sussex guide helps you describe the symptoms before choosing who to contact.
Need a local Sussex trade?
TradeKind connects Sussex homeowners with local trades — free to use, with no hidden fees.
