Key takeaway
Before hiring a tiler in Chiddingly, compare how the substrate, waterproofing and setting-out will be handled before you compare the laying price.
TradeKind helps homeowners find local Sussex trades
Browse approved local trade profiles, compare nearby Sussex trades or post a job for free.
If you are choosing a tiler in Chiddingly, compare how each business deals with substrate preparation, waterproofing and setting-out before you compare the fitting price.
Before a tiler starts work in Chiddingly, agree what condition the wall or floor must be in, how the tiles will be set out and who owns the preparation. The visible tile is only the final layer.
A beautifully laid tile cannot compensate for a moving, wet, uneven or unsuitable substrate underneath it.
Start with the substrate, not the tile catalogue
Tell the tiler what they will be fixing to.
It might be:
- plaster;
- plasterboard;
- tile backer board;
- screed;
- concrete;
- timber floor;
- existing tiles;
- waterproofing membrane;
- other board systems.
If you do not know, say so.
Ask whether the surface is suitable as it stands or requires:
- removal of existing finish;
- levelling;
- patching;
- boarding;
- priming;
- decoupling;
- reinforcement;
- drying;
- waterproofing.
A quote that assumes “walls ready for tile” should define what ready means.
Flatness matters more as tiles get larger
Large-format tiles can make dips and bumps much harder to accommodate neatly.
Before fitting, ask:
- is the wall or floor sufficiently flat;
- what preparation is included;
- what tolerance is expected;
- will levelling work be extra;
- how will corners and returns be handled?
Do not expect thick adhesive to become the plan for correcting major substrate problems.
The preparation should suit the tile and adhesive system.
Wet areas need one waterproofing plan
In showers and other wet areas, clarify whether a tanking or waterproofing system is required.
Then identify who is responsible for:
- substrate preparation;
- boards;
- primer;
- membrane;
- corners;
- pipe penetrations;
- drying time;
- inspection before tiling.
Do not let waterproofing fall into the gap between bathroom fitter, plumber and tiler.
Tile and grout form the finish; they should not be treated as the entire moisture-management strategy.
Set out the room before fixing begins
A good layout considers more than “start in the middle”.
Look at:
- doorways;
- windows;
- bath or shower edges;
- basins;
- niches;
- shelves;
- external corners;
- floor wastes;
- feature walls;
- visible termination points.
Agree which visual lines matter most.
Sometimes perfect symmetry on one wall creates a very small cut on another.
Those trade-offs are best decided while the tiles are still dry.
Discuss cut sizes and awkward details
Ask how the tiler plans to handle:
- narrow slivers;
- sockets;
- pipe penetrations;
- shower controls;
- toilet waste;
- floor wastes;
- niches;
- mitred corners;
- trims;
- window reveals.
For patterned tiles, also agree how the pattern turns corners or continues between walls.
A five-minute discussion before fitting can prevent a detail that annoys you for years.
Tile cutting needs proper dust control
HSE says many construction materials, including tiles, can contain silica.
Cutting, drilling and grinding can create respirable crystalline silica dust that can harm workers.
The contractor is responsible for controlling their work, but as a customer you can still ask practical questions:
- where will tiles be cut;
- will dusty cutting happen inside occupied rooms;
- what water suppression or extraction is used where appropriate;
- how will slurry or dust be contained;
- how will the work area be cleaned?
Do not encourage dry indoor cutting to save a few minutes.
A tidy property is not worth exposing workers or occupants to avoidable construction dust.
Agree trims and exposed edges before ordering
Visible tile edges might be finished with:
- metal trim;
- plastic trim;
- stone profile;
- mitred tile;
- another designed edge.
The choice affects appearance and labour.
Confirm:
- colour;
- thickness;
- finish;
- external corners;
- niche edges;
- top edges.
If the customer supplies trims, check they actually suit the tile thickness.
Grout colour changes the visual result
The same tile can look very different with contrasting or matching grout.
Ask for a real sample where the choice matters.
Also discuss:
- grout width;
- grout type;
- flexible sealant colour;
- change-of-plane joints;
- cleaning and care.
Do not expect grout to conceal a poor tile layout.
The line pattern will often make the setting-out more visible, not less.
Movement needs somewhere to go
Floors and large tiled areas can experience movement.
The tiler should consider the appropriate movement joints and flexible junctions for the system and substrate.
Do not ask for every junction to be hard-grouted simply because a continuous line looks neat on day one.
Where underfloor heating is present, tell the tiler before they quote and follow the specified commissioning and temperature procedure.
Clarify what the tiler supplies
A quote can be:
- labour only;
- labour plus adhesive and grout;
- full supply and fit;
- preparation plus fitting.
List separately:
- tiles;
- adhesive;
- primer;
- levelling products;
- waterproofing;
- trims;
- grout;
- silicone;
- boards;
- waste.
This makes two quotes genuinely comparable.
Allow the finish to cure before rushing the room back into use
Ask when:
- tiles can be walked on;
- grout can be exposed to water;
- sanitaryware can be used;
- underfloor heating can restart;
- sealing or other treatments can happen.
The answer depends on the products and conditions.
For rental work, schedule tenant return around the actual curing requirements rather than the moment the last tile is placed.
Record spare materials at handover
Keep:
- spare tiles from the same batch;
- grout or product details;
- trim specification;
- photos of concealed waterproofing where available;
- underfloor heating layout if relevant.
A few matching spare tiles can make a future plumbing repair much less disruptive.
Label them with the room and property.
Give the tiler the preparation details first
For Chiddingly, carry the practical scope above into the enquiry. The tiler can then price preparation, setting-out and finishing details rather than discovering them after the room is already underway.
For tiling in Chiddingly, you can browse Sussex tilers or post the job on TradeKind. Include the room, substrate if known, tile size or material, wet-area or underfloor-heating requirements, who supplies the materials and any layout details that matter to the finished look.
Send every tiler the same brief
Include:
- room and dimensions;
- photos;
- substrate if known;
- existing finish;
- tile size or material;
- layout preference;
- wet-area requirement;
- underfloor heating;
- trims;
- who supplies materials;
- access;
- other trades involved;
- target dates.
A good tiled room is decided before the first tile is fixed: sound preparation, deliberate setting-out and clear responsibility for everything behind the finish.
Those checks help you choose the tiler who has planned the layers and layout beneath the finished surface, not just the number of square metres.
Frequently asked questions
Should a tiler check the wall or floor before quoting?
Yes. Flatness, movement, moisture, existing finishes and substrate type affect preparation and the suitability of the planned tile. A fitting-only price that assumes a perfect surface should say so clearly.
Who is responsible for waterproofing a shower area?
Responsibility should be explicit. If a tanking or waterproofing system is required, the quote should say who prepares the substrate, who installs the system and what must be complete before tiling begins.
Why does tile layout matter before work starts?
Setting-out determines cuts, grout-line position, symmetry, niches, corners and how the finish meets sanitaryware or doors. Agree the visual priorities before adhesive is mixed.
Is tile-cutting dust a health risk?
It can be. HSE says tiles and many other construction materials can contain silica, and cutting or grinding can create respirable crystalline silica dust. Contractors should use appropriate dust-control methods for the task.
Can I find tilers through TradeKind?
Yes. Use TradeKind to post the job in Chiddingly with a clear description, useful photos where appropriate and the access or timing details that matter. You can also browse relevant trade profiles where available.
Explore trades across Sussex
These are some of the main trades and Sussex areas you can browse on TradeKind. You can also explore many more trades, towns and villages across East Sussex and West Sussex, including Brighton & Hove.
Browse by trade
Can’t see what you need? Browse the full Sussex Trades Directory to explore more trades and areas.
Browse all trades and areasNeed a local Sussex trade?
TradeKind connects Sussex homeowners with local trades — free to use, with no hidden fees.

